- 96 -
●
FTP
Name
Function
Factory settings
IP address
Designate the IP address of the server to which the
0.0.0.0
FTP will be transferred.
Port number Designate the port number of the FTP server to which
21
the FTP will be transferred. It is not generally
necessary to change the setting.
User ID
Designate an account name for connection to the
None
name
server to which the FTP will be transmitted.
User
Designate a password for the account name shown
None
Pasword
above.
Directory
Designate a directory for saving an image file, or a
None
directory with a write authority for the designated
account name.
Passive
Designate whether to use passive mode or active
None
Mode
mode for transmitting the FTP. Use passive mode when
there are restrictions on the ports because of a firewall,
etc.
Time Store
Set whether to regularly save images in the FTP server. None
Time Store
Set whether to connect to the FTP server each time
None
login each
images are transmitted or not (always connected).
send
Time Store
Set the interval at which images will be saved when
30
dwell time
Time Store is valid (30 to 180 seconds).
(seconds)
Image size
Designate the size of images to be saved.
SIF
Half-D1: 704
×
240
SIF: 352
×
240
QQVGA: 160
×
120
Time Store
Designate a file name for the file to be saved. A file
ptc401cip
filename
name consists of the “entered file name” and “time.”
The extension “.jpg” will be added automatically to
each file name. If a file with the same name already
exists in the directory for saving, the data of the older
file will be overwritten. Designate a different file name.
