11
PA
R
T
NAMES AND
FUNCTIONS
English
P1~P32
Rear Panel
Name
Function
(1)
DC IN 12V
(Power Socket)
Plug-in for the AC adapter
(2)
RGB OUT
(Analog RGB
Output Terminal)
To output analog video signal to the projector, the PC
monitor or other RGB input device.
P.15
(3)
RGB IN
(Analog RGB
Input Terminal)
To output the image inputted to this terminal, when [PC]
is selected by Image select button.
P.15
(4)
VIDEO OUT
(Composite Video
Output Terminal)
To output image from the RCA pin-jack terminal to the
NTSC/PAL-system monitor (e.g., TV monitor)
P.16
(5)
OUTPUT
(DIP Switch)
To switch the following:
Left key : Output terminal
Right key : VIDEO output system
• When switching the DIP switch key settings, be
sure to turn OFF the power switch of the main unit.
Switching the DIP switch key with the power switch of
the main unit ON does not switch the output image.
• Either one of [RGB OUT] or [VIDEO OUT] images
can be output. (Unable to simultaneously output both
of [RGB OUT] and [VIDEO OUT] images)
• When the left key is set to [VIDEO], the image
inputted to [RGB IN] can not be output.(The [PC]
button on the main unit is unable to operate)
• Factory default setting provides left key : RGB and
right key : NTSC.
(5)
(4)
(3)
(2)
(1)
