11
•
Further protection is provided with the integration, in the home electric circuit, of
a fault current protection device with a nominal trigger current no greater than
30mA.
•
Contact your electrician for further information. The safety of these electrical
appliances conforms with known technical rules and with the laws regarding the
safety of electrical appliances.
•
Do not leave the plug inserted unnecessarily in the socket; unplug the appliance
when not in use.
•
Place the product on a flat, stable surface, away from sources of heat.
GENERAL USE WARNINGS
Refer to the outer packaging and the specifications on the data plate affixed to the
product itself for the relevant technical specifications.
Use the appliance only for the intended purpose; do not use it on wigs
or on animal hair. These professional clippers are ideal for trimming
hair and beard. The manufacturer declines all liability concerning
misuse of the appliance.
Do not wind the power adapter cable around the adapter to avoid
damage and to avoid any risks derived from the damage.
During charging and use, the appliance may become hot; this is normal.
•
Make sure that the mains voltage matches the one shown on the technical data
plate on the appliance and on the power adaptor.
•
Keep out of reach of children. Children must not use or play with the appliance.
•
The appliance is not designed to be used by persons (including children) with
reduced physical, sensory or mental capacities, or with a lack of experience or
knowledge, unless they are supervised or provided with sufficient instruction on
the use of the appliance by a person responsible for their safety. Children must
be supervised to ensure that they do not play with the appliance. Cleaning and
maintenance must not be performed by children without supervision.
•
To guarantee the proper and safe functioning, should the device fall or impact
violently, have it checked at an authorized customer service centre.
•
The power cord must never come into contact with the appliance.
•
Always disconnect the appliance after use.
•
Use, charge and store the appliance at a temperature between 5 °C and 40 °C.
DESCRIPTION OF THE APPLIANCE AND ITS
ACCESSORIES
Make sure your appliance is provided with the correct accessories (fig.
A
).
1 Body-Handle
2 Head for cutting and finishing
3 Guide Comb accessory (cutting guide) 3 mm - 1/8” inch
4 Guide comb accessory (cutting guide) 6 mm - 1/4” inch
5 Guide comb accessory (cutting guide) 9 mm - 3/8” inch
6 Guide comb accessory (cutting guide) 12 mm - 1/2” inch
7 Blade lubrication oil
8 Brush for cleaning
9 AC/DC power adapter with power cable : 2.4 VDC - 800 mA (supplied)
10 Supplementary battery NI-MH (charge 2.4 VDC-800 mA) (supplied)
11 Clippers power supply socket outlet
12 Operating and charging light
13 ON/OFF Switch
14 Ring to adjust the cutting height (1.0/1.3/1.6/1.9 mm)
15 Cutting height indicator
16 Battery compartment
CHARGING THE APPLIANCE
This appliance can be used on battery power or connected directly to
the mains power supply.
Do not recharge the appliance if the ambient temperature is
below 5°C or above 40°C.
