64
q
e
w
b
Remove the fabric from the machine and cut the
sewing threads.
n
Pull the left end of the filler cord to tighten it.
Thread the end of the cord through a darning
needle and draw it to the wrong side of the fabric
and cut.
Corded Buttonhole
Machine Settings
q
Pattern:
#16
w
Presser foot:
Automatic buttonhole foot R
e
Thread tension dial:
1-5
z x
b n
c v
q
w
e
z
With the automatic buttonhole foot R raised, hook
the filler cord on the spur
q
on the back of the
buttonhole foot.
x
Bring the ends of cord toward you under the
buttonhole foot clearing the front end.
Hook the ends of the filler cord
e
into the forks
w
on the front of the buttonhole foot to hold them
tight.
c
Lower the needle into the garment where the
buttonhole will start and lower the foot.
v
Lower the buttonhole lever and buttonhole foot.
Start the machine and sew the buttonhole over the
filler cord.
The machine stops automatically when finished.
NOTES:
Set the stitch width in accordance with the thickness
of the filler cord used.
To cut the buttonhole opening, refer to page 56.
To sew a corded buttonhole, follow the same
procedure as for a square buttonhole.
Summary of Contents for 5200
Page 1: ......
