20
X
THREADER KNOB
HOOK
NEEDLE HOLE
REPLACEMENT OF NEEDLE THREADER
THREADER PLATE (A)
(FIG. 1)
ADJUSTMENT VERTICAL DIRECTION (FIG. 3)
THREADER
POSITION
SET PLATE
ADJUSTMENT IN HORIZONTAL DIRECTION
THREAD PLATE
SETSCREW (C)
NUT
VIEW FROM X
PIN (B)
SETSCREW
(D)
REPLACEMENT AND ADJUSTMENT OF THE NEEDLE
REPLACEMENT AND ADJUSTMENT OF THE NEEDLE
REPLACEMENT AND ADJUSTMENT OF THE NEEDLE
REPLACEMENT AND ADJUSTMENT OF THE NEEDLE
REPLACEMENT AND ADJUSTMENT OF THE NEEDLE
THREADER PLATE
THREADER PLATE
THREADER PLATE
THREADER PLATE
THREADER PLATE
IF THE HOOK OF THE THREADER PLATE IS DAMAGED, CHANGE OR ADJUST THE
PART AS FOLLOWS:
TO CHANGE THE THREADER PLATE:
TO CHANGE:
1. PUSH DOWN THE NEEDLE THREADER KNOB AND PULL THE NEEDLE THREADER PLATE (A)
OUT TO REMOVE IT (SEE FIG. 1).
2. TO INSTALL THE NEEDLE THREADER PLATE, LINE THE GROOVE OF THE THREADER WITH THE
PIN (B) AND PUSH THE PLATE UP TO SNAP FIT.
TO ADJUST THE THREADER PLATE POSITION:
1. IF THE HOOK ON THE THREADER PLATE THRUSTS OR HITS THE LEFT OR RIGHT SIDE OF THE
NEEDLE EYE, LOOSEN SETSCREW (C) AND ADJUST THE HOOK POSITION BY MOVING THE
THREADER PLATE (FIG. 2).
2. IF THE HOOK ON THE THREADER PLATE THRUSTS OR HITS THE TOP OR BOTTOM SIDE OF THE
NEEDLE EYE, LOOSEN SETSCREW (D) AND ADJUST THE HOOK POSITION BY MOVING THE
THREADER POSITION SET PLATE(FIG. 3).
Summary of Contents for 6200 -
Page 1: ......
