Patio Heaters – Infra-red radiators
3
2.- INSTALLATION
Open the box to take out the heater and all the accessories.
2.- Join
the Lower Post
Assembly
and
the
Middle Post (9) together
with 3-M5X6 screw.
3.- Join
the Upper Post
Assembly (7) and the
Middle Post (9) together
with 3-M5X6.screw
4.- Join the Heating Element Assembly (1) and
the Upper Post Assembly (7) together ,then fix
them tightly by rotating the Knob, and put the
power cord supply into the clamp.
5.- According
to the request of use angle,
Heating Element Assembly can adjust
Angle at 0
º
~45
º
.
1.- Insert the lower
post assembly (11) into the base assembly
(16) and then fix it tightly by means of 4 M6X30 screws, and
insert the clamp (12) into the lower post (11).
