User Manual: Elo
®
Paypoint
SW602189 Rev A, Page 18 of 24
1. Ensure that the register display head is flipped away from the receipt printer (in
customer-facing view).
2. Push the receipt printer head release button to release the printer head cover.
3. Lift printer head cover.
4. Take out the roll of used printer paper, and replace with new roll of printer paper.
Cleaning and Care of Printer
Insert line drawing of printer from customer view
Ensure that the register display head is flipped away from the receipt printer (in
customer-facing view). Push the receipt printer head release button to release printer head
cover and access the different printer components listed in Figure X above.
1. Photo-sensor:
It is recommendable to clean the printer photo-sensor once a month. To do so:
a. Use a Nylon brush (or equivalent) to brush off any paper dust or other residues that may
be on the photo-sensor.
2. Thermal head
It is recommendable to clean the printer thermal head once a month. To do so:
a. Moist cotton swab with isopropyl alcohol.
b. Wipe the thermal head with the cotton swab to remove any stain from the thermal head.
c. Use a dry soft cloth to wipe the thermal head.
d. Wait to allow the thermal head to dry off, and then shut the printer head cover.
3. Roller
