Elo TouchSystems 0702L Quick Installation Manual Download

Page: 2 / 2

Download and install the latest DisplayLink

drivers at www.elotouch.com/support.

Note: DisplayLink driver installation requires

another display to be functioning during

driver installation because the 0702L will not

function without the drivers installed.

Connect the micro USB cable. Ensure the

rubber gasket (red) is all the way inside the

cable cover area.

Install the cable cover by installing the top

side first and rotating it down. Secure the door

with the M3 screw included.

Monitor can be mounted to any standard

75mm x 75mm VESA mounting bracket

using four M4x8mm screws.

Connect the Data Connector of the Y-Cable to the host PC USB port.

Note: Some computers also require connecting the AUX Power

connector to the host PC.

AUX Power Connector

75mm

Data Connector

Go to

www.elotouch.com/support

to download user manual.

请访问

www.elotouch.com.cn

获取用户手册

请保留备用

Summary of Contents for 0702L

Page 1: ...cation may be reproduced transmitted transcribed stored in a retrieval system or translated into any language or computer language in any form or by any means including but not limited to electronic m...

Page 2: ...inside the cable cover area 1 2 3 Install the cable cover by installing the top side first and rotating it down Secure the door with the M3 screw included 4 5 Monitor can be mounted to any standard 75...