background image

APPENDIX

B

T

OUCHMONITOR 

S

AFETY

This manual contains information that is important for the proper setup and maintenance of your

touchmonitor. Before setting up and powering on your new touchmonitor, read through this manual,

especially Chapter 2 (Installation), and Chapter 3 (Operation).

1 To reduce the risk of electric shock, follow all safety notices and never open the touchmonitor

case.

2 Turn off the product before cleaning.

3 Your new touchmonitor is equipped with a 3-wire, grounding power cord. The power cord plug

will only fit into a grounded outlet. Do not attempt to fit the plug into an outlet that has not been

configured for this purpose. Do not use a damaged power cord. Use only the power cord that

comes with your touchmonitor. Use of an unauthorized power cord may invalidate your warranty.

4 The slots located on the sides and top of the touchmonitor case are for ventilation. Do not block

or insert anything inside the ventilation slots.

5 It is important that your touchmonitor remains dry. Do not pour liquid into or onto your

touchmonitor. If your touchmonitor becomes wet do not attempt to repair it yourself.

B-27

Summary of Contents for 1215L









































Reviews: