© 2014 Elo Touch Solutions, Inc. All rights reserved.
User Manual
– 1929LM
SW200158 Rev A - Page 22 of 31
Recall Defaults
Selecting “Recall Defaults” restores all factory default settings for
OSD-adjustable parameters (except OSD Language) and for Preset
Video Mode timings.
Input Select
The monitor continually scans for active video on the VGA ,HDMI and
DisplayPort connectors. This adjustment selects which of those input
ports should be given priority to be displayed.
The options are: VGA Priority, HDMI Priority, DisplayPort Priority
Default: VGA Priority
All touchmonitor adjustments made through the OSD are automatically memorized as soon as they
are entered. This feature saves you from having to reset your choices every time the touchmonitor is
unplugged or powered off and on. If there is a power failure, the touchmonitor settings will not default
to the factory specifications.
OSD and Power Lockouts
Press and hold the “Menu” and “Up” buttons for two seconds to enable/disable the OSD Locking
feature. When the OSD Locking is enabled, pressing any of the Menu, Up, Down, or Select keys will
have no effect on the system.
Press and hold the “Menu” and “Down” buttons for two seconds to enable/disable the Power Locking
feature. When the Power Locking is enabled, pressing the power switch will have no effect on the
system.
Audio
Error! Bookmark not defined.
When audio cable is plugged into the Line-out jack, the action will follow below rules:
Current State - Monitor has sound UNMUTED:
Line-out cable plugged in > Monitor speakers automatically MUTE. User is able to unmute from OSD
menu. Remove cable from line out > Monitor speaker automatically UNMUTE.
Current state - Monitor has sound MUTED:
Line-out cable plugged in > Monitor speakers stay MUTE. Line Out plug is active and not MUTE
(Audio will play unless the source is off/mute). User is able to unmute monitor speakers from OSD.
Remove cable from line out > Monitor speakers stay MUTE.
Volume for the speakers can be controlled by the OSD.
