User Manual<70 Series Monitor>
UM600633 Rev A
6
Connector panel
Note: the cable tie hole is the position through which the tie wrap passes to bind the cable. It just needs to pass the tie warp through
the hole and bind the cable to fix the cable connection.
Touch Monitor Connections
1.
Connect one end of the DP, HDMI or VGA video cable to the DP/HDMI/VGA input connector of the monitor and the other end to
the DP/HDMI/VGA video source. (Tighten the screws on the VGA cable connector for best performance.)
2.
Connect the USB touch line between the USB-B interface of the monitor and the USB-A port on your PC.
3.
Connect the audio cable between the audio out of the monitor and your audio source.
4.
Use the power cable to connect the power supply with the power input interface of the monitor.
5.
The touch monitor ships in an OFF status.
Press the power button to switch it on.
AC power input
HDMI signal input
Audio input or output
DP signal input
VGA signal input
USB-B interface
USB-A interface
Cable tie hole