Battery removal
Battery replacement
1. Remove the top over by
pulling up from notched area.
1. Slide battery under ledge at
front and tilt down at back side.
2. Remove screws (x3)
3. Pull door off.
2. Replace door.
3. Replace screws (x3)
Ambient Light Sensor
Camera and Flash
Function LED
SCR Slot
Power LED
Contactless pay area
(graphic on screen)
Power Button
MSR track
I/O Connector
USB-C
Function Button
Volume Down
Function Button
Volume Up
4. Tilt battery up at bottom
side and pull back to release
battery connector.
4. Replace the top cover.
Micro SD/Nano Sam card + Nano SIM card Installation
1. Remove battery.
2. Pull out Micro SD card/Nano SAM + Nano SIM holder.
3. Place SD cadr/Nano SAM and/or Nano SIM with contacts facing down.
4. Replace holder.
Micro SD
Nano SIM
Nano SAM
Battery connector
Press down
on battery
connector
