en
Nano push-button
5 / 6
version 1.0
08.08.2017
2-component push-button with haptics, convex
2-component push-button with haptics, flat
2-component push-button with haptics, concave
5.4 Lighting
Lighting for functional and / or night lighting.
Controllable LED colours:
red
white
green
yellow
blue
orange
5.5 Colour inserts
1
Colour inserts (1) with Ø 12 mm can be purchased as
standard according to the catalogue. Every other RAL
colour is available on request and defined in the data
sheet.
5.6 Icons
Icons can be printed on according to the standard of ISO
7000.
The inserts are back printed and protected against
abrasion. The lit diameter of the actuation cap is 10 mm.
6 Wiring
Standard circuit diagrams as examples- the circuit given
in the data sheet is authoritative
Normally open contact
Reed switch
Namur
wiring
LED 1 Functional lighting, LED 2 Night lighting
Hall switch,”open drain” toggling
Hall switch, “low side” toggling
