en
Nano push-button
3 / 6
version 1.0
08.08.2017
2.3 Personnel
Only specially trained, authorised specialists may
assemble, install, maintain, repair and carry out all other
work on the nano push-button.
2.4 Conformity
The Nanotaste complies with latest technical standards
and the valid safety regulations at the time of being
placed in the stream of commerce for its intended use.
For design reasons, it was not possible to reasonably
prevent foreseeable misuse without restricting the
intended use.
2.5 Modifications and Conversions
All unauthorised modifications and conversions are
strictly prohibited.
3 Transport and Storage
Protect the nano push-button against heat, humidity,
chemicals and shocks during storage.
4 Technical Specifications
4.1 Designation/type key
Article No. nano push-button:
1-3
4-5
6
7
8
9-10
Note
145
NT
nano push-button
G
Threaded
housing and reed
switch
H
Threaded
housing and Hall
switch
0
no LEDs
1
one LED
2
two LEDs
0
Open Drain
(Hall switch)
Normally open N/O
(reed switch)
1
High side
(Hall switch),
Namur wiring (reed
switch)
xx
Coding colour insert
4.2 Dimensions
4.3 Installation Dimensions
Diameter:
15 mm
Height:
15.85 mm
Installation thread:
M12x1