eloProg - Vers. 1.0
44
Create a new project (configure the eloProg system)
Select icon CREATE from the standard tool bar (Figure 24) to start a new project. The user
authentication window is displayed (Figure 25).
Next the configuration software displays a window showing only the 485EPB.
You may add the various units needed to create your system, using the pull-down menus at
the top of the screen (select slave) and at the bottom to select the relative node (0÷4).
.
SELECT SLAVE
(to add to your configuration)
Figure 26
SELECT NODE
(from 0 to 3) Select to disable memory stick operations
Figure 25
