6
Refill water during operation
1. Unplug the power cord and disconnect the power supply
2. Press down the steam button to release the pressure until no steam is present.
3. Slowly unscrew the safety cap but do not remove it, and residual steam will be
discharged slowly until no steam comes out. Then place the machine in a cool place to
cool it down for about five minutes. Finally, completely remove the safety cap.
4. Use the funnel and measuring cup to refill with a suitable quantity of water.
5. Re-install the safety cap onto the machine body and tighten it in position.
After the machine is used
1. After the cleaning machine is used, unplug the power cord and disconnect the power
supply.
2. Press down the steam button to release the pressure until no steam is ejected.
3. Slowly unscrew the safety cap but do not remove it and residual steam will be
discharged slowly until no steam comes out. Then place the machine in a cool place to
cool down for about five minutes. Finally, completely remove the safety cap.
4. Empty the residual water in the tank and clean the external surface with a dry cloth.
5. Finally, re-install the safety cap onto the machine body and tighten it in position.
1. This appliance is not intended for use by children.
2. Keep away from Children during use.
3. The filling aperture must not be opened during use.
4. WARNING: Danger of scalding.
Applicable Standards: EN60335-1
