8
PKL54C | USER INSTRUCTIONS
Connection/disconnection of the battery
1. To connect the battery, push it into the tool until it reaches the stop position.
2. To disconnect the battery, pull it while pressing the latch.
3. Make sure the battery is properly connected by gently pulling it without pressing the latches.
Use of the control switch
There are three different steps on the control switch on the tool.
1. By sliding the switch to the left, the cutting blade moves forward and thus presses it together.
2. By pushing the switch to the middle position, the cutter is placed in a neutral position and
cannot be operated forward or backward.
3. By sliding the switch to the right, the cutting blade moves backwards and thus the blades
open up.
As soon as the tool is not used, the switch should be in the middle position.
Summary of Contents for 1664791
Page 1: ...PKL54C User instructions GB...
Page 13: ...PKL54C USER INSTRUCTIONS 13 Notes...
Page 14: ...14 PKL54C USER INSTRUCTIONS Notes...
