Elpress HKL85, Instructions For Use Manual

5 

HKL85| INSTRUCTION

Safety instructions relative to the working area:

Keep order in your working area. Disorder in the working area increases the risk of an accident. 
Take account of the working area environment. Do not expose electrical tools to rain. Do not use 
electrical tools in a moist or damp environment. Ensure that the working area is well-lit. Do not
use electrical tools if flammable liquids or gases are nearby.

4. SPECIFIC SAFETY INSTRUCTIONS

At all work, observe the movement of the blades to avoid finger dangeres. 

Hydraulic cutting tool:

Do not put your fingers between blades! Risk of grave cuts. Handle the 

locking spindle with precaution to avoid being pinched. 

The cutting head must not be used for work under tension or in explosive environments. Do not 

use this tool on live cables.

5. INSTRUCTIONS FOR USE

Before using the cutter, check that the moveable blade
is in its rest position (fully retracted by actuating the
release trigger).

Slide the cable through the tool head, or open the
head by  removing the lock drift.

Check that the lock is well closed at the 
beginning of working.

Work the moveable handle to move forward the blade

onto the cable.
Check that the cable is in the correct cutting position. 
Then pump, so the blade moves regularly till the complete
cutting of cable.

To return the piston back, space the moveable handle,
turn it up the thurst and close it completely. 
Check that the moveable blade is in its rest position
before to open the lock.

Perform other cuttings in the same way.

After use, wipe the tool carefully and replace

it in its case.