3
KL85 | INSTRUCTIONS FOR USE
1. ASSISTANCE
In case of questions regarding this product, please contact your Elpress supplier or Elpress directly
through the customer support department at the main office i Kramfors, Sweden.
Telephone:
+46 612 71 71 99
Telefax:
+46 612 71 71 51
mail: sales@elpress.se
2. TECHNICAL DATA
The KL85 hydraulic cutting head must be connected to Elpress hydraulic pump PS700 or P1000.
The KL85 hydraulic cutting head cuts cooper or aluminium cables, with a 55 mm max. passage.
Refer to capacities chart below.
This head i supplied with a protection unit.
Force
Max. Passage
Dimension
Weight
Copper
55kN
Ø85
385x75x170
6,200kg
ALU
Underground isolated aluminium cables
3 x 240 + 1 x 95 mm²
Max Cutting Capacities
1 x 630 mm > 800 mm
Copper cables
630 mm
