3
ELPRESS MINI | INSTRUCTION FOR USE
1 Introduction
Read these instructions for use carefully before
starting to use the tool.
This tool shall only be used for crimping of Elpress’ terminals for electrical
conductors with Elpress’ matched tool accessories.
Crimping with this tool must only be performed by operators trained in its
use and who have good knowledge about crimping and the risks that are
involved.
These instructions for use have to be observed during the entire life span of
the tool. The tool owner has to ensure
•
the availability of the instructions for use for the operator and
•
that the operator has read and understood the instructions for use
2 Labels
On one side of the tool there is a label showing the product name, the
manufacturer and the company logo. Near the battery you find the serial
number.
3 Tool description
The crimp tools PVL130P, PVL130L and PVL350 are handheld, battery powe-
red crimp tools.
PVL130P has parallel crimp action resulting in very clean crimps in more
demanding applications. Crimp force is approx. 13 kN.
PVL130L has parallel crimp action with exchangeable dies for primarily
hexagonal crimp. The crimp head is slim and made for transformer applica-
tions. Crimp force is approx. 13kN
PVL350 has parallel crimp action with exchangeable dies for primarily hexa-
gonal crimps. The dies are held by latches to take the higher crimp force,
approx. 35 kN.
