Steps to be taken before use
Submit the tool to visual inspection and make sure pump, presshead, forks and dieholders/dies are clean and free
from defects. Prior to start of pumping, carefully check proper location of the dieholders and dies in the fork.
IMPORTANT! Pumping must only be performed with tools assembled as per figures below.
Elpress’ hydraulic crimptools V1311-A/V1311C-A are precision tools purely designed to crimp Elpress’ terminals
within the following areas:
Cu-terminals
10 - 400 mm² (V1311C-A not 400mm²)
C-sleeves
10 - 120 mm²
Al-terminals
16 - 240 mm² (V1311C-A does not crimp Al)
For further details, please see our technical literature on connections.
WARNING!
These tools are not designed for so called ”L W W”, that is live wire work.
Make sure the net is dead before starting the crimping operation.
Technical data V1311-A and V1311-C-A
• crimp force
130 kN (13 ton)
• weight net
V1311-A
4.3 kg
V1311-AC
5.7 kg
• length
V1311-A 590 mm, V1311C-A 620 mm
• head rotation
180°
• distance between open handles
~400 mm
11
Figure. Assembled accessories in handtool V1311-A.
Al 16 - 150 mm²
Al 185 - 240 mm²
Cu 10 - 400 mm²
C-sleeves 10 - 120 mm²
Fe-Al 62 - 99 mm²
Summary of Contents for V1311-A
Page 27: ......
