Chapter 4
Configuration
MAN_905G_1.16
Page 106
If ‘Invalid Other ’is returned in the Message Information word in the header of the
response, information about the fault can be found here.
0001h:
Address out of range
000Ah:
Failed to execute MSAC1_Alarm_Ack request
000Bh:
Remote station failure
0010h:
Remote Station DPV1 Failure (see ‘Error Decode’ below).
0011h:
Too much data is sent to the slave (more than Max_Channel_Data_Len)
00FFh:
Module not initialised
•
Error Decode, Error Code 1 & Error Code 2
If ‘Fault Information’ contains error code 0010h, more information according to the
DPV1 specification can be found here.
