6 - EN
ECOLOG-NET LP4
EL6006Ee
Product description
4 Pt100 sensors
-200°C ... 600°C
3- or 4-wire
64,000 measured
values
ECOLOG-NET LP4 dataloggers are network-ready 4-channel dataloggers for recording temperature val-
ues between -200°C and 600°C using Pt100 sensors in 3- or 4-wire circuit. 64,000 measured values can
be recorded. The data are loaded to the PC via local network. The datalogger provides the highest level
of data security because an internal battery backup allows data recording even in the event of a power
outage or network disruption There are various alarm features provided by the local alarm contacts and
the network functions.
1.1 Datalogger
Connections
Membrane keypad
Battery discharge
protection
The ECOLOG-NET LP4 has numerous electrical connec-
tions available on the left-side of the housing and on the
front a display, and a membrane keyboard.
1.
Network connection
2.
Connection for 4 Pt100 sensor: -200°C ... 600°C
3.
USB connection
4.
Power supply, contact inputs and alarm output
5.
Alarm output
6.
Membrane keypad with 4 buttons
7.
Type label with ID number and IP address
8.
Battery
9.
Battery protection
Removal initiates the first "System Reset" entry in the sta-
tus! After removal, it is necessary to wait about 10 sec. until
the datalogger is operational.
1.2 Display
Large LCD display for
measured values,
units and conditions
1.
Measured value with display units
2.
Date
3.
Time
4.
Alarm
5.
Measured value is above upper threshold value
6.
Measured value is below lower threshold value
7.
Sensor number
8.
Alarm flag for sensor 1 ... 4
9.
Communication
10.
Normal ope Wait = StOP
11.
Wait = Strt
10.1 Datalogger display and elproLOG ANALYZE
12.
Activated when the capacity limit of the battery has
been reached. Replace the battery at the next possible
opportunity.
