Monitor settings
ELSA ECOMO 19M99
12
The picture has blue or red shadows
Convergence
The three electron beams are not in registration and are
not hitting the phosphor dots on the viewing screen accu-
rately, resulting in a fuzzy picture on the screen and the
appearance of red or blue shadows around objects. This is
called convergence error. The three control bars on the
OSD page will help to adjust the convergence. The conver-
gence value is correct when the color bars are “sharp”.
Use the selection keys to access the 'CONVERGENCE'
menu page. Using the keys
쏟
/
쏡
or
쒅
/
쒆
you can adjust the convergence correction .
Printer and screen colors should match
Color
Temperature
Color temperature setting enables you to set up your monitor’s background white to
match the white of the printer paper. You can match the colors on screen to match printed
output or some other color swatch. The lower the value, the brighter the paper quality.
Use the selection buttons to select the menu page, 'COLOR'. You can use the
쏟
/
쏡
buttons
to switch between the color temperatures, 9300K (1) and 5000K (2), where 9300K repre-
sents the value for default white. If you set the cursor on the last position the color value
can be finely and variably tuned using the keys
쏟
/
쏡
changes at the same time.
Degaussing
The monitor screen is automatically degaussed whenever it is turned on. You can, of
course, manually degauss the monitor. Use the selection 'MAN.DEGAUSS' in the
'Option' menu and set the value on 'ON'.
Positioning the on-screen menu
The on-screen menu can be positioned anywhere along the horizontal and vertical axes
using the appropriate arrow keys.
The color brillance is to be freshened up again
Color
Brillance
The color of most display monitors tend to gradually lose brillance after several years of
service. The Color Return feature allows you to restore the color to the original factory
preset levels.
First, select the 'OPTION' menu page and move the cursor onto the option 'RESTORE THE
COLOR TEMPERATURE'. Press the key
쏡
. A white rectangle is displayed in the middle
of the screen during the original color images are being restored. This procedure takes
approximately 2 seconds. Please note that this feature probably does not work with old
devices.
The bars should coincide
exactly.
Summary of Contents for ECOMO 19M99
