Menu 12 – Anti-Jam, Electronic Braking and
Gate Movement after Obstruction
Menu No.
Anti-Jam or
Electronic Braking
Factory Default
Adjustable
12.1
Motor 1 Open Anti-Jam
OFF
0.1 to 2.0 seconds
12.2
Motor 1 Close Anti-Jam
OFF
0.1 to 2.0 seconds
12.3
Motor 2 Open Anti-Jam
OFF
0.1 to 2.0 seconds
12.4
Motor 2 Close Anti-Jam
OFF
0.1 to 2.0 seconds
12.5
Electronic Braking
OFF
Off / On
12.6
Opening Direction : Gate Movement after
Obstruction
Gate Stops
Stop / Reverse for 2 sec / Reverse Fully
12.7
Closing Direction : Gate Movement after
Obstruction
Reverse for 2 seconds
Stop / Reverse for 2 sec / Reverse Fully
12.8
Exit
12.1 and 12.2 Motor 1 Open and Close Anti-Jam
When the gate are in the fully open or fully closed position this feature applies a reverse voltage for a
very short time. It will prevent the motor from jamming up the gate so it is easy to disengage the motors
for manual operation.
12.3 and 12.4 Motor 2 Open and Close Anti-Jam
When the gate are in the fully open or fully closed position this feature applies a reverse voltage for a
very short time. It will prevent the motor from jamming up the gate so it is easy to
disengage the motors for manual operation.
12.5 Electronic Braking
This will stop the motors with an electronic brake. Brake applies to obstruction and Stop inputs.
12.6 Opening Direction : Gate Movement after Obstruction
After an obstruction has occurred while opening, the gate will either stop, reverse for 2 seconds or
reverse fully.
12.7 Closing Direction : Gate Movement after Obstruction
After an obstruction has occurred while closing, the gate will either stop, reverse for 2 seconds or
reverse fully.
27
www.elsema.com
