ELSEMA
4G Receiver with relay output, G-2025
Page
10
www.elsema.com
SMS confirmation of relay switching
This feature enables the 1
st
user and the person making a call to get SMS confirmation of the relay switching
ON or OFF.
For relay ON you need the following command
o
PwdGONab#content#
For relay OFF you need the following command
o
PwdGOFFab#content#
Ab is the option for the 1
st
user and the caller to either receive or not to receive SMS confirmation of the relay
switching. Have a look at the table below:
AB Option
SMS Confirmation to user
A (First user)
B (Caller)
1
st
user
Caller
0 0
0 1
√
1 0
√
1 1
√
√
(0) means disable & (1) means enable
Content is the SMS message which the user and the caller will receive.
E.g. If only the 1
st
user is required to receive SMS “gate open” when the relay is ON, the following
command is needed
1234GON10#gate open#
E.g. If the 1
st
user and the caller both are required to receive SMS “gate closed” when the relay is OFF, the
following command is needed
1234GOFF11#gate closed#
If SMS is not required for any users when the relay is ON, the following command is needed.
o
PwdGON##
1234GON##
If SMS is not required for any users when the relay is OFF the following command is needed.
o
PwdGOFF##
1234GOFF##
