background image

ELSEMA 

4G Receiver with relay output, G-2025 

 

 

Page

 

2

 

 

www.elsema.com

 

 

Technical Data 

Power Source 

9-24 Volts DC  

4G Frequency 

850/2100MHz (Compatible with Telstra and Vodafone) 

Output 

Common (C) and Normally Open (NO) relay outputs rated at 3A, 240VAC. 

Shipping Weight  

500 grams 

Dimensions  

95 x 95 x 35 mm. 

 
Safety Instruction 

 

Safe startup 

Do not use in places where phone equipment is prohibited. 

Interference  

Wireless equipment might interfere with the 4G network signals of the G-2025 and influence its 
performance. 

 

Avoid using at Petrol / Gas Stations  

Do not use G-2025 at a petrol / gas station. Power off the GSM Receiver when near fuels or 
chemicals 

 

Avoid using near blasting areas 

Please follow relevant restrictive regulations. Avoid using the device in blasting places. 

 

Reasonable Use 

Please install the product at a suitable place as described in this manual. Avoid signal shielding by 
covering the mainframe. 

 

Maintenance  

All wiring and maintenance should be carried out only by qualified maintenance personnel

.  

 

 

 

 

 

 

Summary of Contents for G-2025















Reviews: