iS400/iS400D/iS400Solar
SWING
GATE
OPENER
MANUAL
C. INSTALLATION OF REAR BRACKET
Step 1:
Before securing the rear bracket to the pillar check the front bracket can be welded to a solid point
on the gate leaf.
Fully close the gate.
Connect the rear and front brackets to the motor.
Hold the rear bracket onto the pillar with the calculated
A
and
B
values.
Move the motor in a vertical direction until the fixing zone is in a solid area of the gate leaf for
the front bracket.
Step 2:
Then fix the rear bracket to the pillar.
D. INSTALLATION OF FRONT BRACKET
For proper operation, the front bracket should be fixed so the motor has the correct angle. Use Table 1 to
calculate the location of the front bracket.
Table 1
B
(mm)
E
(mm)
190 1330
200 1320
210 1310
220 1300
230 1290
240 1280
250 1270
260 1260
270 1250
4
