ELSEMA
MD240-2 Vehicle Loop Detector
- 4 -
Dip switch Settings
5 of CH1
Function
Special Functions
Dip switch 5 is
OFF
When vehicle goes in, CH1 relay is in pulse output for
200ms.
Dip switch 5 is
ON
When vehicle has left the loop, CH1 relay will delay
200ms and will give pulse output for 600ms.
Dip switch Settings
6, 7 and 8 of CH1
Sensitivity (%)
Sensitivity Selection. (Eight Levels Choices)
Dip switch 6,7
and 8 is ON
0.015 (highest sensitivity range).
Dip switch 6
and 7 is ON
0.02
Dip switch 6
and 8 ON
0.04
Dip switch 6 is
ON
0.08
Dip switch 7
and 8 is ON
0.12
Dip switch 7 is
ON
0.2
Dip switch 8 is
ON
0.5
Dip switch 6, 7
and 8 is OFF
0.8 (lowest sensitivity range)
