ELSEMA
MD240-2 Vehicle Loop Detector
- 8 -
Sensitivity Selection
*
In the application, where two or more loop detectors and sensing loops have been installed, set one detector to
high frequency and the other set to low frequency to minimize the effects of cross-talk between the two systems
(The sensing loops and detectors should be positioned at least 2m apart).
Reset Button:
Please note: The MD240-2 must be reset every time a setting change is made to the Dip
switches.
LOOP
Elsema stocks pre-made loops for easy installation. Our pre-made loops are suitable for all types of installations.
Either for cut-in, concrete pour or direct hot asphalt overlay.
see
www.elsema.com/auto/loopdetector.htm
