2020/04/07
WCC Lite user manual
List of mounted file systems, some of which can be dismounted manually.
Mount points
List of mount points which can be enabled, disabled or deleted.
Swap
Swap section is used to describe the virtual memory that can be used if there’s a lack of main memory.
WCC Lite does not use any virtual memory by default.
It should be noted that virtual memory might do a lot of reading and writing
operations. As WCC Lite uses SD card as an additional flash memory, it is highly
advised to not use swap to reduce wearing.
8.5.7
LED configuration
WCC Lite has three LEDs that can be configured: WAN, LAN and WLAN. All of the LEDs have a
default configuration which should fit most of the cases.
59
1.4.0 | ELSETA | Internal web page
