MISSION 1K●2K●3K
SINGLE PHASE
Rev. 02
– 19 March 2015
17
4
Exit the configuration interface. Press and hold the button
for more than 2 seconds to exit this
configuration interface to return to the main interface.
IPF:
The output frequency at the Ups is the same as that of the Ups input voltage. (inactive converter)
50.0Hz:
the output frequency at the Ups is set at 50Hz, regardless of the input frequency at the Ups input.
60.0Hz:
the output frequency at the Ups is fixed at 60Hz, regardless of the input frequency at the Ups input.
4.4 Parameters inquiring
Press and hold the inquiring key
or
for more than half a second (less than 2 seconds) to inquire
about items. The inquired items include input, battery, output, load, temperature. The displayed items on LCD
screen are showed as following:
Output
Display the output voltage and output frequency of the UPS. As the following graphic shows, the
output voltage is 220v, the output frequency is 50Hz.
Load:
Display the numerical value of the active power (W) and apparent power (VA) of the load. For example,
as the following graphics shows: the WATT of the load is 100W, VA is 100VA (when disconnect load, it
is a normal phenomenon to show a small numerical value of WATT and VA).
Temperature: Display the temperature of the inverter in the UPS. As the following graphics shows: the
temperature of the inverter is 37°C.