NEMO2.0
65 • 80 • 120 • 160 • 200 • 300 • 400
LINE INTERACTIVE
Rev. 02 27 Gennaio 2017
6
1. LCD Display
Please refer to Section 6
2. Power On/Off Switch
Push to switch On or switch Off the UPS.
3. Mains input
Nemo2.0 65-80-120-160-400 models are equipped with a power cord to plug directly into the outlet.
Nemo2.0 200-300 is equipped with a male IEC plug. Insert the UPS power cord female plug into this
socket and the other to the power outlet. A fuse in the housing protects against overload
.
4. Output outlets
Connect your loads to these outlets to be protected by the UPS.
5. USB Communication ports
For remote communication. By installing the supplied software via the USB cable, you can manage the
UPS and monitor its signals (Network status, UPS & Batteries, On/Off Scheduling, automatic File back-up
after a network outage, etc.).
6. RJ45/RJ11 connection
These two modular sockets protect the ISDN connection to the Modem or LAN 10 Base-T from
interference of power network.
7. Fuse
To protect input.
8. Fan
Rear view Nemo2.0 400
3
4
5
6
7
8
