elsner elektronik P04-KNX-GPS, Installation And Adjustment

15

Parameter setting

Weather Station P04-KNX-GPS

 • Version: 01.04.2020 • Technical changes and errors excepted.

6.

Parameter setting

6.0.1. Behaviour on power failure/power restoration

Behaviour on bus or auxiliary power failure

The device sends nothing.

Behaviour on bus or auxiliary voltage restoration and following programming 
or reset

The device sends all measurement values as well as switching and status outputs ac-
cording to their send pattern set in the parameters with the delays established in the
"General settings" parameter block. The "Software version" communications object is
sent once after 5 seconds.

44

Temperature sensor: Total measu-
rement

Output

R-CT

[9.1] DPT_-
Value_Temp

2 Bytes

45

Temperature sensor: Min./Max. 
measurement query

Input

-WC-

[1.017] DPT_Trig-
ger

1 Bit

46

Temperature sensor: Minimum 
measurement

Output

R-CT

[9.1] DPT_-
Value_Temp

2 Bytes

47

Temperature sensor: Maximum 
measurement

Output

R-CT

[9.1] DPT_-
Value_Temp

2 Bytes

48

Temperature sensor: Min./Max. 
measurement reset

Input

-WC-

[1.017] DPT_Trig-
ger

1 Bit

95

Brightness sensor measurement

Output

R-CT

[9.4] DPT_-
Value_Lux

2 Bytes

271

Wind sensor: Malfunction

Output

R-CT

[1.1] DPT_Switch 1 Bit

272

Wind sensor: Measurement [m/s]

Output

R-CT

[9.5] DPT_-
Value_Wsp

2 Bytes

273

Wind sensor: Measurement 
[Beaufort]

Output

R-CT

[20.014] DPT_Be-
aufort_Wind_-
Force_Scale

1 Byte

274

Wind sensor: Max. query measure-
ment

Input

-WC-

[1.017] DPT_Trig-
ger

1 Bit

275

Wind sensor: Maximum measure-
ment [m/s]

Output

R-CT

[9.5] DPT_-
Value_Wsp

2 Bytes

276

Wind sensor: Maximum measure-
ment [Beaufort]

Output

R-CT

[20.014] DPT_Be-
aufort_Wind_-
Force_Scale

1 Byte

277

Wind sensor: Max. reset measure-
ment

Input

-WC-

[1.017] DPT_Trig-
ger

1 Bit

No

Text

Function

Flags

DPT type

Size