48
Parameter setting
Weather Station Suntracer KNX sl basic
• Version: 11.03.2016 • Technical changes and errors excepted.
Set the output send pattern.
Set the text to be displayed for conditions met / not met.
If applicable set the send delays.
Calculations and transformation
For calculations and transformations set the output values to the various conditions:
if the condition is met
0 [Input range depending on the type of
output]
if the condition is not met
0 [Input range depending on the type of
output]
if the monitoring time period
is exceeded
0 [Input range depending on the type of
output]
if blocked
0 [Input range depending on the type of
output]
Output sends
• on change
• on change and after reset
• on change and periodically
• when receiving an input object
• when receiving an input object
and periodically
Type of change
(is only sent if "on change" is selected)
• on each change
• on change to condition met
• on change to condition not met
Send cycle
(if sent periodically)
5 s ... 2 h; 10 s
Text if the condition is met
[Free text max. 14 chars.]
Text if the condition is not met
[Free text max. 14 chars.]
Send delay in the event of change
to the condition is met
none • 1 s • ... • 2 h
Send delay in the event of change
to the condition is not met
none • 1 s • ... • 2 h
Output value (if applicable A1 / A2)
if the monitoring time period
is exceeded
0 [Input range depending on the type of
output]
if blocked
0 [Input range depending on the type of
output]
