12
B. Extension delay
After the setting of the lightness, now enter the delay time for the extension of
the shading.
The purpose of the delay is that the shading does not permanently extend and
retract in case of fast changing lightness conditions.
The presetting for the extension is 1 minute. Thus, for one minute, the lightness
must be continuously higher than the value which you have set (topic A of the
automatic settings) for the shading to extend. Thus, the shading quickly reacts to
the sun.
Adjust the value with (higher) and (lower). Then press
in order to access
the setting of the next parameter.
C. Retraction delay
After the setting of the extension delay, now enter the delay time for the
retraction of the shading.
The presetting for the retraction is 12 minutes. Thus, for 12 minutes, the lightness
must be continuously lower than the value which you have set (topic A of the