background image

 www.docuthek.com

D

F

E

GB

RUS

I

© 2014 Elster GmbH · Edition 08.14

Safety

Please read and keep in a safe place

 Please read through these instructions 

carefully before installing or operating. Following the 
installation, pass the instructions on to the opera-
tor. This unit must be installed and commissioned 
in accordance with the regulations and standards 
in force. These  instructions can also be found at 
www.docuthek.com.

Explanation of symbols
 • ,   ,   ,   

... = Action

 

= Instruction

Liability

We will not be held liable for damage resulting from 
non-observance of the instructions and non-com-
pliant use.

Safety instructions

Information that is relevant for safety is indicated in 
the instructions as follows:

 DANGER

Indicates potentially fatal situations.

 WARNING

Indicates possible danger to life and limb.

 CAUTION

Indicates possible material damage.

All interventions may only be carried out by qualified 
gas technicians. Electrical interventions may only be 
carried out by qualified electricians. Wear protective 
clothing for all installation and maintenance work to 
prevent injuries.

Conversion, spare parts

All technical changes are prohibited. Only use OEM 
spare parts.

Contents

Operating instructions

D

GB

F

NL

I

E

GB-1

0585

Translation from the German

Self-recuperative burner 

 ECOMAX

®

 

Self-recuperative burner ECOMAX

®

  .  .  .  .  .  .  . 

Contents   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 
Safety .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 
Checking the usage  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 
Installation   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

ECOMAX

®

 for direct heating systems  . . . . . . . . 3

ECOMAX

®

 for indirect heating systems . . . . . . . 3

Connecting the gas and air pipes   .  .  .  .  .  .  .  .  . 5
Wiring   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 6
Preparing commissioning  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 6
Commissioning .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 8

Igniting and adjusting the burner  . . . . . . . . . . . . 8
Coarse adjustment with the furnace cold . . . . . . 9
Fine adjustment with a hot furnace  . . . . . . . . . . 9

Maintenance  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 0

Assistance in the event of malfunction   .  .  .  . 
Accessories   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4

Flue gas eductor EJEK. . . . . . . . . . . . . . . . . . . 14
Flue gas connector FLUP. . . . . . . . . . . . . . . . . 14
Ceramic radiant tube SER-C  . . . . . . . . . . . . . . 15
Flue gas guide tube FGT  . . . . . . . . . . . . . . . . . 15
Segmented flame tube SICAFLEX

®

   . . . . . . . . 15

P2/P3 set Eco  . . . . . . . . . . . . . . . . . . . . . . . . . 15

Technical data   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5

Logistics   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 6
Declaration of Incorporation .  .  .  .  .  .  .  .  .  .  .  .  . 6
Certification   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 6
Contact   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 6

Safety

Contents

Summary of Contents for Kromschroder ECOMAX 1

















Reviews: