WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
SAFETY INSTRUCTIONS
1.
READ INSTRUCTIONS –
All the safety and operating instructions should be read before the appliance is operated.
2.
RETAIN INSTRUCTIONS -
The safety and operating instruction should be retained for future reference.
3.
HEED WARNINGS –
All warnings on the appliance and in the operating instructions should be adhered to.
4.
FOLLOW INSTRUCTIONS –
All operating instructions should be followed.
5.
WATER AND MOISTURE –
The appliance should not be used near water, for example, near a bathtub, washbowl, kitchen
sink, laundrytub, swimming pool or in a wet basement.
6.
VENTILATION –
The appliance should be situated so that its location or position does not interfere with its proper
ventilation. Do not place on bed, sofa, rug or similar surface that may block the ventilation openings, in a built-in installation,
such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.
7.
HEAT –
The appliance should be situated away from heat sources such as radiators, stoves, or other appliances (including
amplifiers) that produce heat.
8.
POWER SOURCE –
The appliance should be connected to power supply only of the type described in the operating
instructions or as marked on the appliance.
9.
GROUNDING –
Precautions should be taken to ensure that the grounding means of an appliance is not defeated.
10.
POWER CORD PROTECTION –
Power supply cords should be routed so that they are not likely to be walked on or pinched
by items placed upon or against them.
11.
POWER LINES –
An outdoor antenna should be located away from power lines.
12. OBJECT and LIQUID ENTRY - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure
through openings.
3.
DAMAGE REQUIRING SERVICE –
The appliance should be serviced by qualified service personnel when:
a. The power-supply cord or plug has been damaged.
b. Objects have fallen into, or liquid has been spilled into the appliance enclosure.
c. The appliance has been exposed to rain.
d. The appliance has been dropped, or the enclosure damaged.
e. The appliance does not appear to operate normally.
14.
SERVICING –
The user should not attempt to service the appliance beyond that described in the user operating
instructions. All other servicing should be referred to qualified service personnel.
Notes:
a. Dirty or scratched CD may cause a skipping problem. Clean or replace the CD.
b. If an error display or malfunction occurs, disconncet the AC cord and remove all the batteries. Then turn the power back
on.
11.
The triangular symbol with the
lightning Bolt warns the user to the
presence of dangerous non-
isolated voltage on the inside of
this device which may cause an
electric sh
WARNING
DANGER OF A HAZARDOUS ELECTRIC
SHOCK. DO NOT OPEN
WARNING: TO REDUCE THE RISK OF AN
ELECTRIC SHOCK, DO NOT REMOVE THE
FRONT OR BACK COVER. INSIDE THE UNIT,
THERE ARE NO PARTS THAT CAN BE
REPAIRED OR ADJUSTED BY THE USER.
PLEASE REFER TO QUALIFIED TECHNICIANS.
The triangular symbol with the
exclamation highlights important
points of which the user should refer
to the manual regarding maintenance
and repair.
MODEL 4518
Projection clock radio with thermometer and infrared sensor snooze
02-4518-EN.qxp 12/4/06 3:02 PM Page 11
