13
2.1 - PARTS OF THE SYSTEM
CONTROL UNIT (Code ESC10A - ESC10M)
Sheet box with door that can be opened inside which there is an electronic card and a power
supply transformer. It must be installed in an easily accessible place, where it is possible to
see the pulling system. In this way the adjustment and learning phase will be simplified.
CHARACTERISTICS:
Power supply: 220 VAC
Sheet box with door that can be opened and key
Dimensions: 200 x 400 x 125 mm
Weight: 7 kg
PULLING SYSTEM (Code EST10A - EST10M)
Wooden box with movable rod. It contains a
motor
that transmits the motion to the rod with
the pinion - rack system.
The EST10A model is connected to the control unit through 5 wires.
The EST10M model has a mechanism inside controlled by an electromagnet that, when the
system is powered, pull the gear of the motor against the pinion - rack system.
This system can be controlled both electrically and mechanically and it is connected to the
control unit through 7 wires.
Both models can be installed in any positions: horizontal, vertical, on a horizontal plane, on a
vertical plane.
CHARACTERISTICS:
Solid oak box
Base and top in plywood
Positioning resolution: 0,8 mm
Power: 78 N
Stroke of the rod: 18 cm
Length of the rod: 800 mm
Base dimensions: 300 x 230 mm
Total height: 195 mm
Weight: 6,7 kg
