25
6 - CAPTURES MODULE
The CAPTURE MODULE is a programmable device (such as the ORGDRIVE unit) but
limited to a predetermined number of inputs and outputs, particularly suitable for the
management of the capture memories of the mechanical organs.
The two or three boards (depending on the models) are assembled in an aluminium case.
On one side of the case there are all the connectors that connect, through some flat cables,
the unit to the ORGMIE strips (for inputs) and ORGMUE (for outputs).
The maximum number of
capture combinations that is available
is 8x255
(8 pistons x 255
levels).
The visualization of the piston and level happens through a four digits DISPLAY
provided
with brass plate.
MODELS:
Code MA 64
120 inputs and 64 outputs
Code MA 128
120 inputs and 128 outputs
Code MA 192
120 inputs and 192 outputs
Code MA 256
120 inputs and 256 outputs
The module includes:
-
Basic module
-
Inputs/Outputs connection strips with
flat cable (L = 2 m)
-
Display plate with flat cable (L = 2,5 m)
-
External power supply
CHARACTERISTICS:
Maximum current each output: 0,5 A
Dimensions: 150 x 590 x 70 mm (MA64 - MA128)
150 x 590 x 100 mm (MA192 - MA256)
Since 2001 the CAPTURE MODULE has not been updated, either as hardware or as
software. So the module is equipped with a CPU Z180, that is programmable using the
ORGDRIVE configuration programme. So, some functions that are present on ORGDRIVE
CP25 system are not available.
The CAPTURES MODULE has been replaced with the MB24N module.
In this way it is possible to use a standard system ORGDRIVE CP25, with CPU board, input
and output boards in use today and programmable with the last version of the configuration
software (with the possibility to enable all the functions that are available now).
