6
setting is required as it is automatically selected.
2.8 MODE
Used to select the type of logging required, namely Interval, Average,
Event, Event+Interval, Event+Average. This function allows you to select
how logging may be started and stopped via an external trigger, if
required. In addition, you can select whether you wish logging to stop
when the memory is full or whether logging continues and old data is
overwritten.
2.9 CHANNEL SETUP
Used to select the channels from which you require data to be recorded.
The range for each channel is also selected, which could include
engineering units if these have been set up by Darca. This function also
displays how many channels have been selected to record.
2.10 STAT (status)
This function displays the following status information concerning the
datalogger: -
a) internal battery voltage and number of days remaining of viable battery
life when logging
b) external supply voltage
c) memory size (with the ability to change memory size in 1K increments)
d) sensor power-on time (up to 60 seconds before the reading is taken)
e) date format configuration (adjustable)
f) language format (adjustable)
g) mains frequency filter (adjustable)
h) model number and current version of firmware
i) temperature units (thermocouple Squirrels only)
j) network option (if enabled with Darca software)
