8
3.2 Select logging interval
The logging interval can be set between 1 second and 24 hours in 1-
second increments. Recordings are stored at this interval. Press
function
until display shows: -
I N T l o g 0 0 : 0 0 : 3 0
s a m p l e 0 0 : 0 0 : 0 0
Press
set
to display: -
I N T l o g 0 0 : 0 0 : 3 0
H O L D T O C H A N G E
Hold
set
button and cursor will appear: -
I N T l o g 0 0 : 0 0 : 3 0
s a m p l e 0 0 : 0 0 : 0 0
Press
select
to move cursor: -
I N T l o g 0 0 : 0 0 : 3 0
s a m p l e 0 0 : 0 0 : 0 0
Press
set
to change value: -
I N T l o g 0 0 : 0 0 : 3 5
s a m p l e 0 0 : 0 0 : 0 0
This example changes the logging interval from 30 to 35 seconds. Press
function
to clear the cursor and to continue with setup.
3.3 Set the type of logging required
The possible types of logging are detailed in section 4.8.1. However, the
default setting is for recording data at fixed intervals only. Press function
until mode is displayed: -
M O D E l o g
i n t e r v a l
You need do nothing else except set which channels to log if you simply
