ESR series routers
5
Master
Indicator of failover modes operation.
Fan
Fan alarm indicator.
RPS
Backup power source indicator.
8
F
Functional key that reboots the device and resets it to factory settings:
Pressing the key for less than 10 seconds reboots the
device;
Pressing the key for more than 10 seconds resets the
terminal to factory settings.
9
Console
Console port RS-232 for local management of the device.
ESR-1000 front panel
The front panel of ESR-1000 is represented in Figure 2.2
Figure 2.2– Front panel of ESR-1000
The list of connectors, light indicators and controls that are located on the front panel of ESR-1000
are described in Table 2.2
Table 2.2 – Description of connectors, light indicators and controls located on the front panel of ESR-1000
№
Front panel element
Description
1
SD
SD-card connector.
2
USB1
USB-device port.
3
USB2
USB-device port.
4
XG1, XG2
10G SFP+/ 1G SFP transceiver installation slots.
5
[1 .. 24]
24 Gigabit Ethernet 10/100/1000 Base-T (RJ-45) ports.
6
Status
Indicator of device's current state
Alarm
Existence and emergency level indicator of the device.
VPN
Existence indicator of active VPN-sessions
Flash
Activity indicator of exchange with data storages (SD-card or USB
Flash).
Power
Device power indicator.
Master
Operation indicator in failover-modes.
Fan
Emergency indicator of fans.
RPS
Reserve power supply indicator.
7
F
Functional key that reboots the device and resets it to factory settings:
–
Pressing the key for less than 10 seconds reboots the device;
–
Pressing the key for more than 10 seconds resets the terminal
to factory settings.
8
Console
RS-232 console port for local device control.
