OLT LTP-16N, LTP-16NT. User Manual
21
•
•
•
•
•
•
•
•
To install a power module:
Step 1.
Install the power module into the socket shown in Figure 7 or Figure 8.
Step 2.
Screw the module to the case.
Step 3.
The device installation order:
Step 1.
Mount the device. In case of installation to a 19" form-factor rack, mount the support brackets
from the delivery package to the rack.
Step 2.
Ground the case of the device. This should be done prior to connecting the device to the power
supply. An insulated multiconductor wire should be used for earthing. The device grounding and the
earthing wire section should comply with Electric Installation Code. The ground terminal is on the rear
panel,
Step 3.
If you intend to connect a PC or another device to the switch console port, the device must be
properly grounded as well.
Step 4.
Connect the power supply cable to the device.
Step 5.
Turn the device on and check the front panel LEDs to make sure the terminal is in normal
operating conditions.