OLT LTP-16N, LTP-16NT. User Manual
35
•
•
privilege 15 view-firmware
privilege 15 config-vlan
privilege 15 config-igmp
privilege 15 config-dhcp
privilege 15 config-pppoe
privilege 15 config-alarm
privilege 15 config-system
privilege 15 config-general
privilege 15 config-logging
privilege 15 config-interface-gpon-port
privilege 15 config-interface-ont
privilege 15 config-interface-ont-profile
privilege 15 config-interface-front-port
privilege 15 config-access
privilege 15 config-cli
privilege 15 config-management
privilege 15 config-user
privilege 15 commands-interface-ont
privilege 15 commands-configuration
privilege 15 commands-copy
privilege 15 commands-firmware
privilege 15 commands-interface-gpon-port
privilege 15 commands-license
privilege 15 commands-general
privilege 15 commands-system
privilege 15 commands-interface-front-port
Step 2.
Switch to the
configure view
. Set the required permissions corresponding to the level by using
the
privilege
command, e. g. set permissions allowing Level 1 to view configuration of the ONT:
LTP-16N# configure terminal
LTP-16N(configure)# privilege 1 view-interface-ont
Step 3.
Settings of privileges will be applied immediately. No terminal reboot is needed.
LTP-16N(configure)# do commit
4.3.2 User list preview
To view the list of terminal users, enter the
show running-config user
all
command:
LTP-16N# show running-config user all
user root encrypted_password $6$FbafrxAp$vY6mRGiEff9zGhaClnJ8muzM.
1K1g86.GfW8rDv7mjOpcQcRptx7ZY//WTQDi9QxZSZUkOk02L5IHIZqDX0nL.
user root privilege 15
user admin encrypted_password
$6$lZBYels7$1sd.B2eherdxsFRFmzIWajADSMNbsL1fjO7PsVCTJJmpDHpz0gZmkX2rZlJhLgRzTvkDwQ1eqF3MwNQiKGw
Pz/
user admin privilege 15
The
admin
and
root
users always exist and cannot be deleted or duplicated. The terminal supports up to
16 users.