128
LTP-8X(config-cross-connect)("Internet")# outer vid 200
LTP-8X(config-cross-connect)("Internet")# user vid 200
Step 3.
Check the changes made.
LTP-8X(config-cross-connect)("Internet")# do show profile cross-connect Internet
Name: 'Internet'
Description: 'ONT Profile Cross Connect 1'
Model: ont
Bridge group: 10
Tag mode: single-tagged
Outer vid: 200
Outer cos: unused
Inner vid: -
U vid: 200
U cos: unused
Mac table entry limit: unlimited
Type: general
IP host index: 0
Priority queue:
0
Step 4.
By analogy with the described above, create another cross-connect profile (UC_IPTV) for the
second service and configure it with bridge group 11 и S-VLAN 201.
LTP-8X(config)# profile cross-connect UC_IPTV
LTP-8X(config-cross-connect)("UC_IPTV")# bridge
LTP-8X(config-cross-connect)("UC_IPTV")# bridge group 11
LTP-8X(config-cross-connect)("UC_IPTV")# outer vid 201
Step 5.
Set U-VID to "untagged" to have untagged traffic outgoing from the ONT port.
LTP-8X(config-cross-connect)("UC_IPTV")# user vid untagged
Step 6.
Check the changes made.
LTP-8X(config-cross-connect)("UC_IPTV")# do show profile cross-connect UC_IPTV
Name: 'UC_IPTV'
Description: 'ONT Profile Cross Connect 2'
Model: ont
Bridge group: 10
Tag mode: single-tagged
Outer vid: 201
Outer cos: unused
Inner vid: -
U vid: untagged
U cos: unused
Mac table entry limit: unlimited
Type: general
IP host index: 0
Priority queue:
0
Step 7.
Specify DBA parameters. To do this, create a dba profile and adjust the corresponding
settings. We set a value of a guaranteed bandwidth in this example:
LTP-8X(config)# profile dba AllServices
LTP-8X(config-dba)("AllServices")# bandwidth guaranteed 500
Step 8.
Check the changes made.
Summary of Contents for LTP-4X
