162
First group ip: ff15:0::1
Last group ip: ff15:0::ffff
Preview length: 55
Preview repeat time: 60
Preview repeat count: 0
Preview reset time: 3
...
Port [1]:
Speed: auto
Duplex: auto
Bridge group: 1
Spanning tree for bridge group: false
Multicast enable: true
Multicast port settings:
Upstream igmp vid: 14
Upstream igmp prio: 0
Upstream igmp tag control: replace vid
Downstream multicast vid: 14
Downstream multicast prio: 0
Downstream multicast tag control: replace vid
Max groups: 0
Max multicast bandwidth: 0
Shaper downstream:
Enable: false
Commited rate: 1000000
Shaper upstream:
Enable: false
Commited rate: 1000000
Step 2.
Add VLAN 98 in the switch view and enable MLD snooping:
LTP-8X# switch
LTP-8X(switch)# configure
LTP-8X(switch)(config)# vlan 98
LTP-8X(switch)(config-vlan)# tagged front-port 0
LTP-8X(switch)(config-vlan)# tagged pon-port 0 – 7
LTP-8X(switch)(config-vlan)# ipv6 mld snooping enable
LTP-8X(switch)(config-vlan)# exit
LTP-8X(switch)(config)# ipv6 mld snooping
LTP-8X(switch)(config)# commit
MLD snooping is not supported for Model 1.
Summary of Contents for LTP-4X
