50
LTP-8X(config)# radius-server key 12345678-r2 priority 2
LTP-8X(config)# tacacs-server key 12345678
Step 3.
Define server response timeout.
LTP-8X(config)# radius-server timeout 3
LTP-8X(config)# radius-server timeout 3 priority 1
LTP-8X(config)# radius-server timeout 3 priority 2
LTP-8X(config)# tacacs-server timeout 3
Step 4.
Define a port for data exchange with the server (if necessary).
LTP-8X(config)# radius-server port 50005
LTP-8X(config)# radius-server port 50006 priority 1
LTP-8X(config)# radius-server port 50007 priority 2
LTP-8X(config)# tacacs-server port 50008
Step 5.
Apply the changes.
LTP-8X(config)# do commit
13.2
ААА methods configuration
By default, every AAA function is implemented locally - local user data base is used for authentication and
authorization, accounting via a remote server is disabled.
For using of configured in previous steps servers, define a method of a function performing.
Step 1.
Select an authentication method:
LTP-8X# configure terminal
LTP-8X(config)# aaa authentication radius
Step 2.
Select an authorization method:
LTP-8X# configure terminal
LTP-8X(config)# aaa authorization
Step 3.
Select a CLI session start/stop accounting method:
LTP-8X# configure terminal
LTP-8X(config)# aaa accounting start-stop radius
Step 4.
Select a method of commands accounting:
LTP-8X# configure terminal
LTP-8X(config)# aaa accounting commands
Step 5.
Apply the changes:
LTP-8X(config)# do commit
In order to disable a function, use
no
command:
Summary of Contents for LTP-4X
