10
BA-en-3021-1912_R23ATR
2. Safety
The units have been designed, built and tested using state-of-the-art engi-
neering, and have left the factory in a technically and operationally safe
condition. If used improperly, the units may nevertheless be hazardous to
personnel and may cause injury or damage. Read the operating instruc-
tions carefully and observe the safety instructions.
2.1 Identification of risks and hazards
Possible risks and hazards resulting from the use of the units are referred
to in these operating instructions by the following symbols:
Warning!
This symbol appearing in the operating instructions refers to operations
which, if carried out improperly, may result in serious personal injuries.
Caution!
This symbol appearing in the operating instructions refers to operations
which, if carried out improperly, may result in damage to property.
2.2 Proper Use
The R23ATR point charging bar must only be used for applying static elec-
trical charges onto paper, fabrics, films and other non-conductive materi-
als for the purpose of improving and accelerating production processes.
The R23ATR point charging bar may only be operated with the Eltex high
voltage generators up to maximum 30 kV DC, the R23ATR11 up to maxi-
mum 60 kV DC depending on the design.
The Eltex high voltage generator POWER CHARGER PCSC can be used
together with versions with fixed high voltage cables.
The manufacturers will not assume any liability and warranty if the units
are used improperly or used outside the intended purpose.
Modifications or changes made to the devices are not permitted.
Use only original Eltex spare parts and equipment.