BA-en-3021-1912_R23ATR
15
3.2 Distance of the emission tips from the material web
The optimum distance a to the substrate is 20...40 mm with an operating
voltage of 15...25 kV. In edge tacking to prevent neck-in, a distance of
10 mm with a maximum operating voltage of 20 kV is also permitted (see
Fig. 10).
Warning!
Before adjusting the bar with the operating voltage applied, make sure
that the bar is clean and dry and that the cable and the bar are un-
damaged. Moisture, dirt and defective parts carry the risk of electric
shock. When adjusting the bar with the operating voltage applied, the
operator must wear conductive footwear.
